01/0445° Herringbone
For DrivewaysPavers arranged in a zigzag pattern at 45° to the border. The diagonal layout gives the driveway a distinct pattern within its surrounding edges.
Paving laid by

Paving Contractor · Canberra Region
Prime Paving Canberra lays clay, travertine and porcelain pavers for driveways, pool surrounds, garden paths and outdoor entertaining areas. We handle ground preparation, paver installation and finishing across Canberra and the capital region.
Replacing an old surface or fixing an uneven path? We also carry out paving repairs, lifting and relaying sunken or loose pavers.
A driveway, swimming pool surround and garden path each need a different approach. Our residential paving covers new installations, replacement paving and repairs, with the materials and preparation worked out for your project.






What Goes Under Your Pavers
The finished pattern is only part of a driveway. For clay paving, installation starts with excavation, compacted road base and bedding sand, followed by laying the pavers and securing the edges.
01We excavate the area to make room for the road base, bedding sand and pavers. Any old concrete, paving or turf that needs removing is accounted for when the job is quoted.
02Road base is crushed rock that is packed down to form the foundation beneath the paving. We place and compact it in layers before preparing the sand bed.
03Bedding sand is spread over the compacted base and levelled with a straight edge, ready for the pavers to be laid.
04We lay the pavers in the chosen pattern inside a border row, also called a header course. Mortar supports the outside edge, and polymeric jointing sand, a sand that sets firm, fills the gaps between the pavers.
Clay, Travertine and Porcelain
We install clay, travertine and porcelain pavers. Your choice of material and where it will be used determine how the paving is laid, using either a prepared sand bed or mortar.
Clay or brick pavers are laid on compacted road base and bedding sand, rather than being set in mortar. This is the approach used for our dry-paved driveways, garden paths and courtyards, with jointing sand swept into the gaps.
Wet Paving
Dry PavingWet paving, also called rigid paving, uses mortar to set the pavers or outdoor tiles in place. For swimming pool surrounds, we lay travertine or porcelain pavers over a concrete slab, with coping finishing the pool edge. Our outdoor tiling also uses mortar rather than a sand bed.
Laying Patterns
The same pavers can create a different look depending on how they are arranged. These four paving patterns offer options for driveways, paths, courtyards and entertaining areas.
01/04Pavers arranged in a zigzag pattern at 45° to the border. The diagonal layout gives the driveway a distinct pattern within its surrounding edges.
02/04The same zigzag arrangement, aligned square to the edges. An alternative to diagonal herringbone for driveways and the area in front of your garage.
03/04Rows offset by half a paver, like a brick wall laid flat. A simple, regular pattern for garden paths and paved areas around the home.
04/04Pairs of pavers alternate in direction to create a woven appearance. A traditional pattern for courtyard paving and outdoor seating areas.
Your Paving Quote
Paving costs depend on the measured area and the work needed to prepare, lay and finish it. Your quote accounts for the pavers, site preparation, removal of existing surfaces, laying pattern and access.
Tell us what you are planning and roughly how large the area is. We will measure the site and work out a paving quote for your project.
Ask for a Measured Quote
How It Works
Call or complete the form with your location, what needs paving and an approximate size. Let us know whether it is a new paved area, a replacement surface or a repair.
We measure the area and prepare a quote based on your pavers, the preparation required and the layout of the job.
We carry out the ground preparation and install the pavers using the base and laying method for your project.
We complete the edges and joints for the selected paving method, then sweep the finished area.
Every step is done by Dominic Deegan, who runs Prime Paving Canberra on his own. Read about who lays your paving
Service Areas
We carry out residential paving throughout Canberra, from Gungahlin and Belconnen to Woden Valley and Tuggeranong. Our service area also extends to Yass, Goulburn, Braidwood and Cooma.

Paving Questions
No. An approximate size is enough for your first enquiry. Tell us what needs paving and where the property is, and we'll measure the area before we quote.
Yes. Existing concrete, pavers or turf can be removed as part of preparing the area. The removal work needs to be accounted for in your quote, so mention the current surface when you contact us.
Yes. As well as Canberra, we pave in Yass, Goulburn, Braidwood and Cooma. Put your suburb or town in your quote request.
Yes. We lay travertine or porcelain pool surrounds and install the coping pavers along the pool edge. The surrounding paving is set in mortar over a concrete slab.
Yes. We lift sunken or loose pavers, level and compact the bed underneath, then relay the existing pavers. Tell us which area needs attention when you enquire about paving repairs.
Our dry-paving method uses compacted road base and bedding sand rather than laying pavers directly on soil. The area is excavated and prepared before the pavers go down.
Yes. We install porcelain pavers for pool surrounds and large-format porcelain outdoor tiles for porches and patios. These are set in mortar rather than installed in the same way as dry-laid clay pavers.
Have a Question We Haven't Answered?
Ask Your Question on the Contact PagePaving Quotes
Planning a driveway, finishing a pool surround or fixing an uneven path? Send us a few details about your project to arrange a measured paving quote.
Prime Paving Canberra carries out new paving, repairs and relaying across Canberra and the capital region.
Prefer to Call? (02) 6189 4970